The Vintage Airstream E-mail List

Archive Files


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [VAL] CF bulbs



Ken,
Yes, I am learning a lot and appreciate everyone a this forum. Incandescent 
50 watt 12 volt under your vent hood or in your standard sized fixture 
consumes 50 watts. That a lot. The same thing but in a 60 watt equivalent 
spiral compact fluorescent (CF) consumes 13 watts and that is why it is 
called a CF 13 watt spiral. You get more light, and consume almost 4 times 
less battery drain which equates to much longer time. A Thin Light dual tube 
typically consumes about 1.5 to 2.5 watts, depending on which of the 
available brightness of tube type you choose. That is almost 33 times less 
battery drain. An LED light with 43 LED's in a super flux will require less 
than 1/4 of one watt, a drain on the battery at the least of 200 times less. 
The lesser intensity LED's such as not as bright, or in colors of typical 
red and amber drain at a rate of at least 1000 times less than that single 
50 watt incandescent bulb.

LED in white requires two colors, blue and brown, to make the white. You 
cannot use a white led in a colored lenses. The color of the lenses will 
change the light produced. You cannot use a red in a yellow or yellow in a 
red. Same thing happens with the color spectrum.

In your vehicle, the alternator must run everything electrical, and 
replenish the battery. All this matters if your like me, need to keep that 
95 going, don't want to replace and service things like the alternator.

All light, except fiber optic, make heat. Less heat equates to longer life 
on lenses, or longer use since some of the incandescent 1156, 1157, 194, and 
9mm bulbs will simply yellow, deform, melt, or even burn thru your lenses 
cover. Heat high to low is incandescent, spiral, U tube, tube, LED, and 
fiber optic.

LED is forward projecting only. You cannot simply replace a tail light or 
marker light with an LED and expect it to work. One LED, properly projected, 
and designed, exceeds the light and the DOT requirements of one 194 (glass 
spaded peanut) or 9mm (brass bayonet clearance bulb) incandescent bulb, but 
this is only in red and amber. White is substantially a different LED topic 
and evolution still in infancy. The 1156, a single contact brass bayonet 
incandescent bulb is 15 mm. So too is the 1157, a double contact, double 
intensity usually found in tail lights and some front park lights on your 
vehicle.
-Eddie-
Houston, TX