The Silver Streak E-mail ListArchive Files[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [SilverStreak] Trailer Exterior Repair Question
Hey Eddie I have a photo, where you want it sent? > From: Eddie@huffstetter.com > To: sslist@tompatterson.com > Subject: Re: [SilverStreak] Trailer Exterior Repair Question > Date: Mon, 16 Jun 2008 12:34:39 -0500 > > D Wixon, > The eyebrow over the door can be removed by drilling the rivets, > straightening, sealing with putty rope, and reaffixed. Torn out holes can be > enlarged and larger rivets used. If tearing, it can still be saved. If > destroyed simply straighten and use as a pattern. Suitable aluminum sheeting > is not too expensive and is available in a rack at most ma and pa hardware > stores. The drip eye brow and seal is important for keeping water from > running in the top of the door. The top of the door mainly stops blowing > rain, but not for flowing water. > > When you can, send a picture off-list and I will help you identify your > trailer. At 20 feet it is likely a Prince, Duke, or Duchess depending on > what you are measuring. If a 26 foot it is likely a Countess. If it is not > anodized, but a shiny skin with a clear coat it will be a 1967 or older. I > think all 68 and up are anodized. The roof dent and repair is repairable, > but is a lot of work. > -Eddie- > Houston, TX >
|