[VAC] Fantastic Fan Installation Questions

[Dick and Kris Parins <dkparins@xxxxxxxxxx>]

Before you do any new wiring check to see if the openings were pre-wired for
12 volts.  Mine was which saved me some work.

If you are replacing something with either or both fans you may find that
some of the holes in the flange line up with old holes and the old holes are
too large for the screws that seat properly in the fan.  I was able to use
little bolts of the appropriate size by bending down the interior of the
trailer enought to get the nuts on using a needle nose vice grips.  I lined
up the nuts while my wife turned the bolts from above.

Dick
'62 Bambi