Ed,
The 67 GT that we are working on now has the formica screwed on the bathroom
side & the oak paneling is glued onto the living room side. There are height
adjustment nuts visible once you remove the formica. Try loosening both of
these off & separate the rollers from the door.
Colin
-----Original Message-----
Colin,
I removed the 6 screws that hold the trim in the bathroom over the
pocket door but the rollers will not lift out of the track. Do I need
to remove the rollers from the door either by loosening the nut at the
top or removing the 4 screws that are in the top of the door? Also
there doesn't seem to be enough room to remove the door in the space
of the opening, I could be wrong but I guess if I turn the door into
the bathroom it might come out.
thanks again,
Ed