The Vintage Airstream E-mail List
Archive Files
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [VAL] holes in belly pan
Hi Terry,
Welcome to the riveter's world !
The rivet tool should cut the stem off for you, but you're
right it does take some arm muscle. You might want to look
for a riveter that has longer handles, but after another a
little while of working on the trailer, those muscles will come.
I found that using the shortest rivet that will get a good
bite makes the work easier. They also make a washer that you
can put on the back of the rivet (if you can reach it) to
increase the surface pull.
And remember only use aluminum ones.
Good luck,
Daisy