VAC E-mail List Archive

The Vintage Airstream E-mail List

Archive Files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [VACList] aluminum polish/tiles

To: <vaclist@xxxxxxxxxxxxx>
Subject: Re: [VACList] aluminum polish/tiles
From: "JRKleven" <jrkleven@xxxxxxxxxx>
Date: Mon, 18 Nov 2002 21:02:15 -0600
Delivered-To: tompatterson@7
References: <001501c28f5e$95af32e0$e37d2f44@evans>
Reply-To: vaclist@xxxxxxxxxxxxx
Sender: admin@xxxxxxxxxxxxx

Lexxy,
If you really want to make your windows look sexxy, do what you alluded to,
that is a FINE brass brush on a drill.  I did it and it looks like new.  The
Dremel with a small brass or carbon wire brush will touch up the corners
where the big wheel won't reach.  Mine came out great.  It takes a little
time but far better results than any polish without buffing.
Randy

References:
- RE: [VACList] aluminum polish/tiles
  - From: Lexxy

Prev by Date: Re: [VACList] Napier stripper
Next by Date: RE: [VACList] Napier stripper
Prev by thread: Re: [VACList] aluminum polish/tiles
Next by thread: Re: [VACList] aluminum polish/tiles
Index(es):
- Date
- Thread