[VAC] Re: HW Bypass - Center bath Sovereign

[Charlie/Betty Burke <cbburke@xxxxxxxxxxxxx>]

Dave,

You will find when you take the toilet out and the panel that there is not
enough room to install a bypass. The only practical option is to install the
bypass around on the forward side of the heater in the area under the sink.
Over the years there have been several different types of bypasses. There are 1
valve, 2 valve and the most common 3 valve versions. The 1 valve version is
almost always a quarter turn valve. Many of the 2 & 3 valves versions are also
quarter turn. These are simpler to use in such a limited space and you can tell
at a glance what position they are in.

Charlie