VAC E-mail List Archive (message)

The Vintage Airstream E-mail List

Archive Files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [VAC] Axle camber

To: <vintage@xxxxxxxxxxxxxxxxxx>
Subject: Re: [VAC] Axle camber
From: "Robert C Townsend" <rctowns@xxxxxxxxxxxxx>
Date: Wed, 16 Aug 2000 23:13:50 -0700
List-Id: Vintage Airstream Club <vintage.list.airstream.net>
References: <11220-399B64CA-1500@storefull-238.iap.bryant.webtv.net>
Reply-To: vintage@xxxxxxxxxxxxxxxxxx
Sender: vintage-admin@xxxxxxxxxxxxxxxxxx

As i 'gut' my '49 A/S, the camber becomes increasingly apparent... this is
not the original axle, but one which was installed only a few years ago.
It's a moot point, since i plan to replace it with a Henschen
axle/suspension system, but it is disconcerting. Perhaps because this
trailer is only 80" wide, the installers found it necessary to bend it
further than 'normal'... but it really is noticeable...

Tuna
'49 Clipper
wbcci #8862

References:
- Re: [VAC] Axle camber
  - From: Bill Scott

Prev by Date: Re: [VAC] Axle camber
Next by Date: [VAC] Re: [VAC]Univolt
Prev by thread: Re: [VAC] Axle camber
Next by thread: Re: [VAC] Axle camber
Index(es):
- Date
- Thread