VAC E-mail List Archive (message)
The Vintage Airstream E-mail List
Archive Files
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [VAC] Dielectric grease
First question is what connectors are you using?
And apply after on both ends after crimping... or an easier more permanent
way is to before you crimp slip on a pc. of adhesive lined heat
shrink...Crimp your connector, slide the heat shrink down over the plastic
part of the connector and heat it. It will seal the wire end of the connector
and use the grease to do the lug or socket end connection.
If you want to learn more about crimping and heat shrink go to our business
site and click on the "How To pages"! <A
HREF="http://members.aol.com/aamrelectr/index.html">AAMR/AirCore/</A> or
http://members.aol.com/aamrelectr/index.html
Yes...You are right it is shameless self promotion!...But if you want to
learn about the BEST way to hook up 12 volt stuff...That's what we do.
Best regards,
John C. @Air Stream 58 Caravanner & 63 Tradewind
<A HREF="http://members.aol.com/airstream58/Page81.html">58/22' AirStream</A>
( click the link to go there! )