Re: [SilverStreak] Wiring in a 1975 sstreak

["Eddie" <Eddie@xxxxxxxxxxxxxxx>]

JD,
Forget finding the bad grounds and make new ones. Put a little grease 
wherever and just before you connect to metal to avoid future corrosion at 
the chassis. This is a constant problem and you are on the right path. The 
most common open, and burn-up circuit problems are the grounding. Direct 
ground to each bulb, load, and device adds wire and work, but totally worth 
the effort. Not practical unless total restoration, you will find chasing a 
bad connection ground points can often be like fixing the washer, doing 
exhaust work, or that "simple" plumbing repair in your home.

-Eddie-
Houston, TX