The Silver Streak E-mail List

Archive Files
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [SilverStreak] SS Gold Trim Question

Thanks for the reply Ralph, sounds like a plan for me then!


> I have replace all of the screws that I could get to come out, all but about
> 8 of them that will need to be drilled out.
> I used Stainless Steel Philips head screws about 5/8 inch long, I did not 
> run a bead of silicone on the new screws as there was no silicone or other 
> sealant on the old rusty screws. Changing out the rusty screws sure 
> improves the appearance.
> 
> Ralph
> 
>
----- Original Message ----- 
> From: "D Wixom" <spudrocker@q.com
>
> Subject: [SilverStreak] SS Gold Trim Question
>