Re: [SilverStreak] (Fwd) Help re Removing toilet platform

["Richard Closson" <clossonmbs@xxxxxxxxxxxxx>]

Bev,

I neglected to mention that the toilet flange is screwed down to the 
platform. The flange  was also threaded into the black water tank and needed 
to be unscrewed.

----- Original Message ----- 
From: "Bev Harris" <zia@ix.netcom.com>
To: <sslist@tompatterson.com>
Sent: Wednesday, April 30, 2008 7:32 PM
Subject: Re: [SilverStreak] (Fwd) Help re Removing toilet platform


> Richard,
>
> Thanks so much!  I may be almost there!  I've removed all the screws; I 
> guess I have to lift
> up.
>
> Bev
>
>
> On 30 Apr 2008 at 9:29, Richard Closson wrote:
>
> From:           "Richard Closson" <clossonmbs@altrionet.com>
> To:             <sslist@tompatterson.com>
> Subject:        Re: [SilverStreak] (Fwd) Help re Removing toilet platform
> Date sent:      Wed, 30 Apr 2008 09:29:43 -0700
> Send reply to:  sslist@tompatterson.com
>
>> Bev
>>
>> I can tell you how my 71 SS Saber 23' platform is installed. There are 
>> wood
>> rails screwed into the side and rear walls and a face plate on the front 
>> of
>> the platform, the top or lid of the platform is screwed into the wood 
>> rails
>> and the top of the face plate. I had two lines, hot and cold, that go 
>> around
>> the black water tank that had to be replaced. My platform was rotted, and 
>> I
>> made a new one from 3/4 ply after replacing the copper lines. It helped 
>> to
>> remove the side of the sink cabinet and clothes closet. All done with a
>> screwdriver.
>> ----- Original Message ----- 
>> From: "Bev Harris" <zia@ix.netcom.com>
>> To: <sslist@tompatterson.com>
>> Sent: Tuesday, April 29, 2008 8:47 PM
>> Subject: [SilverStreak] (Fwd) Help re Removing toilet platform
>>
>>
>> > Our new-to-us '64' SS 20' Sabre has a leak under the toilet platform.
>> > I've
>> > been trying to figure out how to get down into it  without destroying 
>> > it.
>> > Can
>> > anyone offer any help?
>> >
>> > I'll be working on it again this weekend ...
>> >
>> > Bev
>> > 1964 SS 20' Sabre
>> >
>> > P.S. I sent a msg a couple days ago that didn't get posted.  Maybe it 
>> > was
>> > too
>> > long?
>> >