RE: [VAL] Hinges for Waterheater Access Cover

["Tim S." <safari_tim@xxxxxxxxxxx>]

If it's the same as on my Atwood, there are little metal tabs that the metal
hinge slides under.

I put a screw with a large washer onto the metal tab to keep the hinge from
being able to work loose.

If look really close at the following picture in the lower corners you can
see the screw head that is holding the tabs down.

http://www.ldservice.com/tim/airstream/images/new%20hwh%201.jpg

Seems to be working fine.

-Tim
theVAP.com