RE: [VAL] Replacing an Atwood Water Heater

["Tim S." <safari_tim@xxxxxxxxxxx>]

I found the current Atwood replaced my original '71 Bowen water heater just
fine.  It was a tight fit but it went in w/o modifications.

I was able to use the original stainless cover with a little modification.
On the new atwoods the exhaust cover is attached to the heater instead of
the cover.  So I removed it and attached it to the cover with some small
bolts.

You can see the trouble I went through here ;-)

http://www.ldservice.com/tim/airstream/wacky_water_heater.htm

-Tim
www.ldservice.com/tim/tim