VAC E-mail List Archive

The Vintage Airstream E-mail List

Archive Files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [VACList] Water damaged plywood

Hi Jim,
I cut the soft plywood out, trimmed the space from the removed edge square
with a Dremel cut-off wheel and replaced it with new plywood the same
thickness. Applied the veneer right over the top after sanding the seam
smooth. Took off about 10" of wrinkled plywood from the floor up right
inside the entryway. Write me off-list if you want pictures.

Brad Norgaard
Phoenix
'59 Trade Wind Twin
VAC #2699, TCT