[VAC] Air Conditioner retrofit

["phil patterson" <patermichael@xxxxxxxxxxx>]

I started investigating putting in an AC unit in my 1961 Tradewind, I would 
like to put it in the spot where the central heater used to be under the 
sink. I accidently ran across an AC out of a truck camper, it was a through 
the wall design similar to a smaller window unit. I would need to cut off 
about 4 in. of the bottom plate and cover to make it fit. About all I would 
have to move is the compressor slightly and reposition the front panel 
controls. It is nice in that there is a plastic tray under the evaporator 
coil with a tube to let it drain outside. My biggest concern is making sure 
that there is enough air exit space for the condenser fan since I will have 
to take some of the outlet for it when I cut off the side. Any suggestions 
or opinions would be appreciated.  Phil