Re: [VAC] Ground Wires in 12 Volt Circuits

["Philip Piper" <pmpiper@xxxxxxxxxxx>]

John Buffalow,
I have run into this problem many times over the years, with rear lights on 
the old step side pickups and all kind of trailer lights. It is so simple to 
just go ahead and run both wires. If you plan to do a rewire by all means 
install 2 wires, there is no reason other than saving a penny, no to run a 
hot and a ground. I reccomend that you connect the "ground" wire to the 
chassis at some point.
Phil