Re: [VAC] new to the group

[TOM WALDEN <twalden1@xxxxxxxx>]

Stripping suggestions.  A.  Remove the doors and drawers and bring them
into the garage or basement.  You can work on them more at your leisure
if you have a place to leave that project set up for shorter spurts of
effort. 
                         B.  This leaves the surrounding woodwork free
and clear so that you can spend weekends finishing sections at a time,
making  progress 
in increments that give you a sense of accomplishment.
                        C.  Try different products.  Leave plenty of
ventilation.  check out that peel off coat stuff, maybe it will work
better on your job.

If you have an early enough airstream there is a tire stem type valve
that you can use to pressurize it by the inlet as long as the seals are
tight still.
Tom