RE: [SilverStreak] SS sabre logo casting

["Darin Unthank" <darin@xxxxxxxxxxxxx>]

I'm in for two sets (front and back) and the "Sabre"

Regards,

Darin

-----Original Message-----
From: sslist-admin@tompatterson.com
[mailto:sslist-admin@tompatterson.com] On Behalf Of Patti Glover
Sent: Monday, April 28, 2008 2:43 PM
To: sslist@tompatterson.com
Subject: Re: [SilverStreak] SS sabre logo casting

Yes..I am definitely interested in set of logos in aluminum.  Are you
going to have the  "SABRE" done as well?  Just keep me posted...Thanks,
Jason.....patti

Jason Parks <jjparks@shaw.ca> wrote: Hi Patti, I have a '66 Sabre that
has 1 complete original logo. I have a 
friend who owns a foundry business and I had planned to ask him to make
a 
pattern and cast the lettering into aluminum. Something finally lucky
about 
being from the rainy BC coast! as the letters haven't cracked and 
disintegrated like they would've in some nice warm sunny climate!

If you're interested I can find out how much it would be to get a couple

more cast -- as the more that he can cast, the cheaper it'll be for all.
Jason


----- Original Message ----- 
From: "Patti Glover" 
To: 
Sent: Sunday, April 27, 2008 9:24 AM
Subject: Re: [SilverStreak] 73 Continental Rocket restoration


> The bottom of my S and the top of the "k" is missing, but I do have
the 
> "star" that dots the "i" in Silver.  Does anyone have a complete set
of 
> logos for the '66 SilverStreak Sabre that I can get a casting from?
>
> Tom Patterson 
 wrote: For what its worth, I 
> have a '65 Streamline Duchess which had plastic
> "Streamline" logos on both the front and back.  It also has a plastic
> "Duchess" logo under the "Streamline" one in front.
>
> Both Streamline logos were badly cracked with pieces broken off.  I
was 
> able
> to obtain an intact plastic logo, and after trying several shops in 
> Houston,
> I finally found one - Astec Castings, which was able to make a mold
and
> provide me with the logos in cast aluminum.  They worked very well.
The
> "Duchess" logo was in good shape, so I left it alone.
>
> It took several trys again with the paint.  At first I sprayed them
with
> blue paint from a rattle can, but the wind soon wore the paint off.  I

> next
> got some blue spray paint from a local model shop, and that has lasted
a
> number of years.  It is the same paint that they use on these small
model
> racing cars.  A bit pricey, but well worth it.
>
> If anyone is interested, I have the address and phone number for Astec
> Castings.  I assume that they are still in business.
>
> -Tom
> ----- Original Message ----- 
> From: "Patti Glover"
> To:
> Sent: Saturday, April 26, 2008 8:08 PM
> Subject: RE: [SilverStreak] 73 Continental Rocket restoration
>
>
>>I have a  '66 SS  with plastic emblems in front and back.  I would be
>>interested in metal emblems as well.  There are also two "SABRE"
emblems 
>>as
>>well.  Thanks....patti
>