Re: [SilverStreak] SS logos

["Eddie" <Eddie@xxxxxxxxxxxxxxx>]

I think you meant to say: I plan to keep the mold  myself.

I did ask and the mold (s) will be given to you if asked. Mold is not saved 
or stored so you have to ask for it. Other places I called will not do this 
claiming proprietary.

I assume you did not keep the Streamline molds correct? I am having to pay 
set up again.

Jerry said there is shrinkage of 3/16" per foot on castings from mold. I do 
not know if you want to mention that. I believe these were 18". Likely the 
end holes will need to be enlarged from the center hole mounting with a 
paper template to line up with existing holes in the trailer.

For those like me who are adding the logo as a "new" item, shrinkage and 
hole alignment is a non-issue.
-Eddie-
Houston, TX

----- Original Message ----- 
From: "Tom Patterson" <pattersontj@sbcglobal.net>
To: <sslist@tompatterson.com>
Sent: Wednesday, June 04, 2008 6:14 AM
Subject: Re: [SilverStreak] SS logos


>I plan to keep the logo myself.
>
> -Tom