The Silver Streak E-mail ListArchive Files[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [SilverStreak] Plumbing help please!
Richard, Thanks for the response. I do not think I would have thought of bolting a 2x4 down for leverage. Thanks for that idea! Bev On 12 May 2008 at 15:45, Richard Closson wrote: From: "Richard Closson" <clossonmbs@altrionet.com> To: <sslist@tompatterson.com> Subject: Re: [SilverStreak] Plumbing help please! Date sent: Mon, 12 May 2008 15:45:15 -0700 Send reply to: sslist@tompatterson.com > Bev > > My flange (71SS) screws into the tank. > When mine wouldn't unscrew, I put the studs that hold the toilet back in > place, drilled matching holes in a 2x4, bolted it down with the toilet nuts, > then had some leverage to unscrew the flange. I think I used some wd40 also. > > > ----- Original Message ----- > From: "Bev Harris" <zia@ix.netcom.com> > To: <sslist@tompatterson.com> > Sent: Saturday, May 10, 2008 9:44 AM > Subject: [SilverStreak] Plumbing help please! > > > > My 1964 SS Sabre has a leak in the copper running under the platform the > > toilet sits on. I've removed the toilet and partly disassembled the > > platform, > > and realized I must remove the flange in order to get the top of the > > platform > > off so I can try to see the pipes. > > > > I am unable to get the flange off! There were 4 very rusted screws > > holding it > > down and I've removed those, but when I try to lift up, it pulls on the > > black > > water tank rather than coming loose. I've tried twisting, and can't get > > it to > > budge that way either. > > > > This appears to be the original platform (it was held together with large > > staples). The flange is cast iron and is probably original as well. If > > pictures > > would help, I'd be happy to post pictures. > > > > I'm trying to get under the black water tank so I can find the leak and > > fix it. > > Is there a better way to go about this? > > > > Bev > > > > On 9 May 2008 at 21:30, Ken Wilson wrote: > > > > From: "Ken Wilson" <ke5dfr@sbcglobal.net> > > To: <sslist@tompatterson.com> > > Subject: RE: [SilverStreak] Re: Silver Streak Digest V1 #580 > > Date sent: Fri, 9 May 2008 21:30:51 -0500 > > Send reply to: sslist@tompatterson.com > > > >> Cut back the pipe and use new pipe and fittings glued on. > >> > >> > >> > >> Ken Wilson > >> KE5DFR > >> Cypress, Texas > >> > >> -----Original Message----- > >> From: sslist-admin@tompatterson.com > >> [mailto:sslist-admin@tompatterson.com] > >> On Behalf Of Sherylyn > >> Sent: Friday, May 09, 2008 9:07 PM > >> To: sslist@tompatterson.com; sslist-digest@tompatterson.com > >> Subject: [SilverStreak] Re: Silver Streak Digest V1 #580 > >> > >> Any suggestions on how to adjust or adapt the valve on the black water > >> tank > >> to a new one. The bolt pattern is not the same. > >> > >> Thanks > >> > >> Dave and Sherylyn > >>
|