RE: [VAL] Tom re: Covers

["Tom Williams" <TCWilliams@xxxxxxxxxxx>]

My Armstrong developed a similar leak.  After removing the shroud, and
shroud attachment brackets, the unit was found to be held to the roof by 5
screws on either side, and 3 screws on either end for a total of 16 screws.

These screws were removed, and Vulkem was liberally applied everywhere it
could be squeezed in.  New stainless screws were used to reattach the unit
to the roof.  No more leak.

Contact me off-list if you want more detail or pictures.

Tom