VAC E-mail List Archive

The Vintage Airstream E-mail List

Archive Files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [VACList] Floor bolts/ Elevator bolts

To: <vaclist@xxxxxxxxxxxxx>
Subject: Re: [VACList] Floor bolts/ Elevator bolts
From: "Oliver Filippi" <ofilippi@xxxxxxxxxxxx>
Date: Wed, 19 Mar 2003 14:11:14 -0800
Delivered-To: tompatterson@7
References: <000a01c2ee5e$9b1b7680$16b50ecf@jwjp501> <n2ph7vktqgdd6tf4qog9ssfa3knggn4f1d@4ax.com>
Reply-To: vaclist@xxxxxxxxxxxxx
Sender: admin@xxxxxxxxxxxxx

Elevator bolts are essentially flat head carriage bolts.  They have a flat
head with a cone shaped base (just like a flat head screw.  However, they
also have the square shank where the threaded shank of the bolt goes into
the head.  Thus yoiu can insert them into a countersunk hole and tighten
them from the threaded end without the need for a wrench on the other side.

Oliver Filippi

References:
- [VACList] Floor bolts
  - From: Earl Peck
- Re: [VACList] Floor bolts
  - From: Chris Bryant

Prev by Date: Re: [VACList] Floor bolts
Next by Date: Re: [VACList] Floor bolts
Prev by thread: Re: [VACList] Floor bolts
Next by thread: Re: [VACList] Floor bolts
Index(es):
- Date
- Thread