[VAC] Re: Control center problems

[Jim Dunmyer <jdunmyer@xxxxxxxxxxx>]

Todd,
 If that wire is "fried", you'll probably have to cut of an inch or 2 to
get to good, shiny copper in order to do a good job.

Dunno if this control panel is similar to those used in 1968, but those
had a "low voltage disconnect" relay and circuit board that sensed
voltage from the tow vehicle and disconnected the 'charge' line if it
got too low. The idea was that you could use the tow vehicle's battery
for lights, etc. in the trailer and the relay would disconnect it while
there was still enough juice to start the engine.

The relay was jumpered out in my '68 G.T.

                                      <<Jim>>