Posted by Gordon on May 27, 2002 at 10:34:04:
In Reply to: Engine data posted by Gordon Owen on May 24, 2002 at 12:20:49:
FT Series Engines
Ford Truck series blocks, 330/331/361/389/391, are similar to FE's, but with beefier parts. The blocks are heavier, with beefed up main bearing webs. The cranks were typically forged steel, and will interchange with FE's if you use the FT timing chain cover, damper, and pulley. Or you can have the thicker 1.750" snout turned down to 1.375", the standard FE size.
The above lifted from
http://www.fordmuscle.com/archives/2000/04/projectfe/index2.shtml
HWForums.com Message Forums
Copyright © 2001 HighWired Internet Innovations Inc. All rights reserved.