The Silver Streak E-mail ListArchive Files[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [SilverStreak] Painting the logos
I have a 1958 Silver Streak Clipper with complete aluminum logos front and rear. They had small chip fragments of original paint in the corners of some letters. The "Silver Streak" was turquoise and the "Clipper" was bright red. I had a gentlemen that has been doing antique car restorations for over 60 year look at the colors and he said they looks very much like the late 1950s Ford Turquoise and the late 1950s Corvette Red. I bought a very small can of each at a shop that specialized in selling pin stripping paint (total cost of less than $15.00) and the paint matched perfectly to the original chips. The paint has now been thru three years of weather and many trips and look fine. Hope that this may be of help, regards. jim ----- Original Message ----- Was it you, Tom, who painted some logos using "model shop paint" and felt that it stood up really well to weather and wind? We have huge issues with weather down here with the temperature extremes, dryness, blowing sand, and most especially strong UV radiation. So since this will be so important to us, I've been researching it online a little. I've learned that of the various model acrylics, Floquil acrylics are the only ones that 1) offer colors close to what we need, and 2) specifically state that they work well on metal. I was delighted to find that Reefer White, a paint in the Floquil Polly Scale Railroad Colors line, was a PERFECT match for the background of the logo. (I happen to have the paint here and looked at the color after I had painted it on a white card). The red isn't so easy. Basically, I'm trying to find reds that have no black or white and very little yellow in them. I have DTI Cherry Red, but it seems to have a little too much black in it. Odd, because the actual DTI red (prior to solar fading) seems perfect. Maybe Seaboard Air Line Chinese Red would work okay. Under the "Model and Hobby" line, Polly Scale offers Red, which seems nice. Under the Badgers acrylic railroad colors line (now owned by Testors) I found CB&Q Chinese Red that might be a match. And the Model Masters acrylic line (now owned by Testors) has some VERY nice reds. Rot RLM 23 and Stop Light Red both look great. Chevy Engine Red and Insignia Red are other possibles. I haven't seen a lot of suitable enamel colors yet, but I noticed that Testors under their Testors enamel line offers a few reds that could work: Red, Cherry Red, Bright Red, and Candy Red. (As long as the acrylic Reefer White is really dry, it is fine to use enamels next to it). I guess our main problem right now is that we really can't figure out exactly what kind of red the logos were originally painted. I've been looking at all the photos I can find, and it seems to me that the red of the logo was painted to match the red of the taillights and rear markers--which makes the Model Masters "Stop Light Red" the perfect choice. It looks great to me, anyway. I just don't know if Model Masters acrylics will work on metal. After the logo is painted, I think I'll see what kinds of clear finishes I can find in the automotive parts store; from what I can see here in New Mexico, automotive finishes are the only ones that can actually hold up to UV. Who here has painted their logos? What kinds of paint did you use? What colors? And Tom, what brand of paint did you use, and what color? Does anyone have any other ideas? Cristi
|