Mobil 1 the best ! , Plus get you a filter Magnet ,this thing grabs all
particles , change it every 5000. We use a Teflon base Oil by Mobil in Our
Airtools on Build up, all the new bearings are soaked for 2 hours then spun
in a fixture at 2000 rpm then packed with a grease we get from John Deere
It's a Micro type Moly. It sticks and stays in for one year. It works great
in Bearings, but the trick is to clean and coat first. WE also use a AT 10
Air Tool lube in our Polishers it also has Teflon , note I have one polish
that is packing over 3 years of Service. But the good stuff cost you
several Books of Green stamps . Look at the cost in the long run ,an engine
overhaul is a Months pay ?

Technology Does make the difference , JW